Kirish eshiklari klaviaturasi

Kirish eshik kirish klaviaturasi provides comprehensive access control for all outdoor and indoor locations. Door/system status is indicated by a high intensity LED light source and an audible sounder. Access door entry keypad is specified to survive in different service environments, ranging from exposed unsupervised public locations to general service indoor applications. Keypads in the access control system range are dimensionally and electrically interchangeable. This allows users, entering codes at both outdoor or indoor access points, to establish and maintain familiarity with the keypad features.

1. Parameter ofaccess eshik kirish klaviaturasi

2. Oʻlcham chizmasi:

3. Electrical and data connections

Pin 1: GND-tuproq

Pin 2: V- --Quvvat manbai salbiy

Pin 3: V+ -- Quvvat manbai ijobiy

Pin 4: Signal-Eshik/qo'ng'iroq qo'ng'irog'i-Ochiq kollektor eshigi

Pin 5: Quvvat - Eshik/qo'ng'iroq qo'ng'irog'i uchun quvvat manbai

Pin 6 va 7: Chiqish tugmasi - Masofadan / chiqish tugmasi - eshikni ochish uchun xavfsiz joy

Pin 8: Umumiy - Eshik sensori umumiy

Pin 9: Sensor YO'Q - Odatda ochiq eshik sensori

Pin 10: bosimining ko'tarilishi sensori - Odatda yopiq eshik sensori

Eslatma: Eshik tirqishiga ulanishda, mo'ljallangan qo'llanilishi va qulflash mexanizmiga mos keladigan odatda ochiq yoki odatda yopiq eshik sensorini tanlang.

4. Installation instructions

O'rnatish bo'yicha ko'rsatmalar: o'rnatishni boshlashdan oldin diqqat bilan o'qing.

A. Using the case as a template, mark the position of the four hoes on the surface.

B. Drill and plug the fixing holes to suit fixing screws(supplied).

C. Run the cable through the sealing grommet.

D. Secure the case to the surface using the fixing screws.

E. Make the electrical connections as shown in the below wiring diagram to the connector block.

Korpusni erga ulang.

F. Fix the keypad to the rear case case using the security screws(Use the nnylon sealing washers under the screw heads)